How much is an automatic labeling machine?

The general standard is about tens of thousands to 100,000, but there are many kinds of automatic labeling machines, there are round bottles, flat ones, depending on what product you want to paste, because different models have different functions, so the price will also be Not the same, if you don’t know the equipment very well when you buy it for the first time, it is recommended that you consult with “Price Automation”, they will advise you which suitable automatic labeling machine and how to debug it?

1. Adjustment of the bottle feeding star wheel, the bottle feeding star wheel and the bottle feeding screw rod: When adjusting the bottle feeding and bottle feeding star wheel and the bottle feeding screw rod, the bottle pressing head of the labeling machine shall prevail. First adjust the bottle feeding star wheel. When the bottle pressing head just presses the bottle, adjust the bottle feeding star wheel so that the bottle is located in the middle of the star wheel groove. Adjustment of the bottle feeding screw: Take the bottle feeding star wheel as the criterion. When the bottle is in the middle of the groove of the bottle feeding star wheel, adjust the screw rod so that the bottle feeding side of the screw rod is close to the bottle without displacement. Adjustment of the bottle star wheel: When the bottle pressing head is just lifted, the single-sided automatic labeling manufacturer will quote the price and adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel.

2. Adjustment of the label box: the center line of the label box, the center axis of the label station is tangent to the label paper, the three points of the center axis of the label plate are in a line, adjust the tangent between the label plate and the label paper (0 distance), and then move the label box closer 1mm ~ 2mm can be. The gap between the standard paper in the standard box and the pressure bars on both sides should be between 0.8mm and 1mm. If the gap is too large, the standard paper will shift in the standard box, resulting in oblique marking. If the gap is too small, the standard push will be difficult. Adjustment of the position of the grabbing hooks of the standard box: the upper and lower, left and right grabbing hooks are on the same vertical plane and work evenly on the standard paper, so that the mark can be grasped smoothly. Adjustment of the label feeding roller: when there is no label, the label pressing plate can be pressed to the front end of the label box and when the label is loaded, the label near the label hook finger cannot be crushed.