When the labeling machine breaks down during startup and labeling, how should we deal with it correctly Can we quickly eliminate problems and solve them quickly without affecting work efficiency? Here are some solutions provided by senior labeling machine design engineers, hoping to help you

On startup:

In case of abnormal noise during equipment operation, stop the machine immediately for inspection; If the lubrication of the rotating shaft does not meet the rotation requirements, add lubricating oil;

If the equipment is affected by the working environment, check whether there are water stains or other liquids on the equipment surface.

When labeling:

In case of irregular bar code, abnormal mark output, missing mark, etc., stop the machine immediately to check;

Check the operating system for parameter setting errors, impurities on the surface of the labeled rotating shaft, and whether the labeled label is damaged.

Of course, the problems involved in equipment maintenance and testing are far more than the above. To use the equipment correctly and properly, you must also understand the working principle, operating environment, precautions and other knowledge of the equipment.

The accessories of the automatic labeling machine have powerful functions. The marking functions of single label and double label can be switched arbitrarily. The distance between the front and rear double labels can be adjusted flexibly. The circumferential positioning function can be selected. Positioning labels are set on the circumferential surface. What aspects should be paid attention to in the use and maintenance of the accessories of the automatic labeling machine?

First, keep the accessories of the automatic labeling machine clean. If there are water stains on the surface due to carelessness during use, wipe them dry after use, and keep the surface clean and dry frequently.

Second, metal guide rails and hinges shall be lubricated regularly to keep the lubrication bright. Do not strike or scratch the surface of hardware fittings with hard objects to avoid contact with hydrochloric acid, salt, brine, etc.

Third, if there are serious stains or scratches on the surface and burns, gently grind the surface with fine sandpaper (400-500) and then wipe it with a scouring cloth.

Fourth, do not scrape the surface with sharp and hard objects. Wipe it with a wet cloth or dip it in neutral detergent. Wipe the water stains before treatment.

Fifth, do not put the high-temperature cup or other high-temperature items directly on the furniture hardware (glass, stainless steel, metal handle, etc.), but use a tripod, heat insulation pad, etc. To avoid surface discoloration or blistering.

The above is about the use and maintenance of the automatic labeling machine. The labeling machine should be well maintained for long-term use.